Personalised Christmas Stocking Holder

Make Your Christmas Mantel Personal

Give every family member’s stocking its own dedicated place with an LXS Labs Personalised Christmas Stocking Holder.

Each holder is manufactured to order with your chosen name in decorative connected-script lettering. Choose classic black or white and order individually or as a matching family set.

Personalised for You

Enter one name or short piece of text for each holder ordered. Names are manufactured exactly as entered, so please check spelling carefully before submitting your order.

Longer names will be adjusted to remain within the approximate 100mm nameplate width. The final lettering height and proportions will vary depending on the number and shape of the letters.

Pack Sizes

• Single holder
• Pack of two
• Pack of three
• Pack of four

When ordering a multi-pack, enter each required name on a separate line.

Two-Piece Design

Each stocking holder consists of:

1. A continuous hook and mounting plate
2. A personalised script nameplate that slides into position

The two components are shipped separately to protect the personalised lettering during delivery and can be assembled easily at home.

Key Features

• Custom name or short personalised text
• Decorative connected-script lettering
• Matching family pack options
• Choice of black or white
• Genuine 3M VHB adhesive included
• One-piece hook and mounting component
• Slide-in personalised nameplate
• Designed and manufactured in the UK
• Made individually for your order

Product Information

• Material: PLA+
• Nameplate width: Up to approximately 100mm
• Mounting plate: 60 × 20mm
• Mounting method: Genuine 3M VHB adhesive
• Construction: Two-piece slide-together design
• Colours: Black or white
• Manufacturing method: FDM 3D printing

Installation

1. Check that the mantelpiece or shelf has a smooth, clean, dry and suitable mounting surface.
2. Apply the supplied adhesive to the mounting plate.
3. Position the holder with the hook hanging freely over the front edge.
4. Press the mounting plate firmly into place.
5. Allow approximately 72 hours at room temperature for the adhesive bond to develop before adding a stocking.
6. Slide the personalised nameplate into position.

What’s Included

For each holder ordered:

• One stocking hook and mounting plate
• One personalised nameplate
• Genuine 3M VHB adhesive

Christmas stockings and other decorations shown in the photographs are not included.

Important Surface Information

The supplied adhesive is designed to create a strong bond and is not guaranteed to remove without marking or damaging the surface.

It may affect paint, varnish, veneer, laminate or other delicate furniture finishes. Do not attach it until you are satisfied that the mounting surface is suitable.

It is not recommended for rough, porous, dusty, damp, loose or uneven surfaces.

Important Safety Information

These holders are intended for lightweight decorative Christmas stockings.

No certified maximum load rating is provided. The supported weight depends on the mounting surface, surface preparation, temperature, adhesive bond and duration of loading.

Do not use for heavily filled stockings, climbing, pulling or supporting people. Check the attachment before every use.

Keep away from open flames, active fireplaces and mantelpieces that become hot. PLA+ can soften or deform when exposed to excessive heat.

Minor layer lines and small surface variations are normal characteristics of additive manufacturing.