Standard French Cleat Starter Pack – 4 Pairs

Four Sizes. Eight Brackets. One Complete Bundle.

The LXS Labs Standard French Cleat Starter Pack contains every available size from our popular Standard mounting range.

With four complete interlocking pairs included, you can select the most suitable bracket for different frames, organisers, signs, panels and custom DIY projects without ordering each size separately.

Buying the starter pack also saves around 10% compared with purchasing all four pairs individually.

What’s Included

Each pair contains two matching interlocking components.

Total supplied: four complete pairs containing eight individual brackets.

Choose Your Fixing Method

Screw mount

All eight brackets feature pre-drilled, countersunk mounting holes for suitable mechanical fixings.

Adhesive mount

All eight brackets are supplied with high-bond adhesive tape for compatible, properly prepared surfaces.

Mixed mount

Every pair contains one countersunk screw-mounted bracket and one adhesive-mounted bracket. The complete pack therefore contains four of each type.

Key Features

• Every Standard French Cleat size in one bundle
• Four complete mounting pairs
• Approximately 10% cheaper than buying separately
• Three fixing configurations
• Removable interlocking design
• Proportional profiles for different projects
• White PLA+ construction
• Designed and manufactured in the UK

Suitable For

• Picture frames and decorative panels
• Signs and display boards
• Workshop tools and accessories
• Removable wall organisers
• Woodworking projects
• 3D-printed accessories
• General DIY mounting projects
• Testing different bracket sizes before a larger installation

How It Works

Attach one component to the wall or mounting surface and the corresponding component to the item being mounted.

The angled sections interlock to create a concealed mounting connection while allowing the item to be lifted off when access or removal is required.

Important Information

No certified load rating is provided. Supported weight depends on the selected bracket size, fixing method, wall construction, installation quality and direction of the load.

Mechanical fixings should be used for heavier, valuable or fragile items. Adhesive-only mounting must not automatically be assumed suitable for heavy loads.

The adhesive requires clean, dry, smooth and compatible surfaces. Textured, dusty, damp, porous or weakly painted surfaces may prevent reliable adhesion.

These brackets are intended for suitable indoor projects and must not be used for structural, overhead, safety-critical or human-supporting installations.

PLA+ should not be exposed to prolonged excessive heat. Minor layer lines are a normal characteristic of additive manufacturing.