Slimline French Cleat Wall Mount – Pair

Mount frames, signs and lightweight accessories using a clean, discreet and removable fixing system.

Designed and manufactured by LXS Labs in the UK, these Slimline French Cleat brackets provide a lower-profile alternative to our Standard range. Their interlocking design allows the mounted item to be lifted away when access or repositioning is required.

How It Works

Each set contains two matching components. One is attached to the mounting surface and the other to the item being mounted. The angled sections then interlock to hold the item in position.

Choose Your Fixing Style

• Pre-drilled: Both components are prepared for screw mounting
• Self-adhesive: Both components feature an adhesive fixing surface
• Mixed fixing: One pre-drilled component and one self-adhesive component

Always select fixings suitable for the mounting surface and intended application.

Available Sizes

Length	Height	Bracket profile
50mm	20mm	6mm
100mm	30mm	7mm
150mm	40mm	9mm
200mm	50mm	12mm

The stated profile is the thickness of the bracket component and does not necessarily represent the final gap between the wall and mounted item.

Features

• Low-profile alternative to conventional French cleat brackets
• Removable interlocking design
• Four lengths available
• Three fixing configurations
• Manufactured from white PLA+
• Precision 3D printed
• Designed and manufactured in the UK

Suitable For

• Picture frames
• Signs and display boards
• Decorative panels
• Lightweight organisers and accessories
• Custom DIY mounting projects
• Installations where reduced bracket depth is important

What’s Included

• One pair of Slimline French Cleat components
• Two interlocking pieces in your selected size and fixing configuration

Important Information

These brackets are intended for suitable lightweight indoor applications. No certified load rating is provided because capacity depends on the bracket size, mounting surface, selected fixings and quality of installation.

Do not use for safety-critical, structural or overhead installations. Valuable or fragile items should always be secured using an appropriately tested mechanical fixing system.

Self-adhesive versions require a clean, dry, smooth and sound surface. Textured, dusty, damp, porous or weakly painted surfaces may prevent reliable adhesion.

PLA+ should not be exposed to excessive heat or prolonged high-temperature conditions. For thicker mounting hardware, see our Standard and Heavy Duty French Cleat ranges.

Minor layer lines and small surface variations are normal characteristics of additive manufacturing and do not affect the product’s function.